Home › Home & Construction › EV Charging Time Calculator
EV Charging Time Calculator
This EV charging time calculator estimates how long it takes to charge an electric vehicle from one battery level to another. Enter your battery size, the current and target charge percentages, and your charger's power — a home socket, a wallbox, or a DC fast charger — and the tool works out the energy needed, the charging time, and the approximate electricity cost. It works for electric cars and two-wheelers alike; you only need the battery size in kWh, which is printed in the vehicle manual and on most spec sheets.
| Energy the battery will gain | |
| Electricity drawn from the supply | |
| Charging time | |
| Estimated electricity cost |
How to use this EV charging calculator
- Enter your vehicle's battery size in kWh — 40 kWh is a common mid-size car battery; electric scooters are usually 2–4 kWh.
- Enter the battery percentage now and the percentage you want to reach. The popular everyday window is 20% to 80%.
- Pick your charger from the list, or choose Custom and type its power. The power your car can accept matters too — the slower of the charger and the car decides.
- Leave efficiency at 90% unless you know yours; charging always wastes some energy as heat.
- Optionally set your electricity price per unit to get the cost of the charge.
How charging time is calculated
Only the slice of the battery between your two percentages needs energy. A 40 kWh battery going from 20% to 80% needs 60% of 40 kWh, that is 24 kWh into the battery. The charger must supply a little more than that, because conversion losses (the efficiency) turn some electricity into heat — at 90% efficiency the supply provides 24 ÷ 0.90 = 26.67 kWh. Time is simply the battery energy divided by the charger's effective power.
One real-world caution: DC fast charging slows down as the battery fills — most cars charge fastest up to about 80% and then taper sharply to protect the battery. AC home charging is steadier. So treat a fast-charge estimate to a high target as the best case; the last 20% on a DC charger can take as long as the first 60%. This is also why the 20–80% window is the standard planning range for trips.
Worked example
A car with a 40 kWh battery charges from 20% to 80% on a 7.2 kW home wallbox at 90% efficiency:
- Energy needed = 40 × (80 − 20) ÷ 100 = 24 kWh
- Time = 24 ÷ (7.2 × 0.90) = 3.70 hours = 3 hours 42 minutes
- Electricity drawn = 24 ÷ 0.90 = 26.67 kWh
- Cost at ₹8 per unit = 26.67 × ₹8 = ₹213.33
That is a typical overnight top-up: plug in after dinner, and the car is at 80% well before morning.
The same charge on different chargers
40 kWh battery, 20% to 80% (24 kWh needed), 90% efficiency:
| Charger | Power | Approximate time |
|---|---|---|
| Home socket | 3.3 kW | 8 hours 5 minutes |
| Home wallbox | 7.2 kW | 3 hours 42 minutes |
| AC charger (3-phase) | 11 kW | 2 hours 25 minutes |
| AC charger (3-phase) | 22 kW | 1 hour 13 minutes |
| DC fast charger | 50 kW | 32 minutes |
| DC fast charger | 150 kW | 11 minutes |
The DC figures assume the car can actually accept that power and ignore the slow-down near full charge — a car limited to 50 kW gains nothing from a 150 kW charger. Check your car's maximum AC and DC charging rates before planning around a fast charger.
Frequently asked questions
Why do people charge only to 80%?
Two reasons. First, lithium batteries age slower when they are not kept full or empty, so manufacturers and owners favour the middle range — charging between about 20% and 80% for daily use, and to 100% only before a long trip. Second, charging slows down a lot after 80%, especially on DC fast chargers, so the last 20% costs a lot of time for a little range.
Why is my real charging time longer than the estimate?
The estimate assumes the charger delivers its full power steadily. In real life the car may accept less than the charger offers, DC charging tapers as the battery fills, cold weather slows charging, and a shared or weak supply can reduce power. Treat the result as a good planning figure for AC home charging, and as a best case for DC fast charging to high percentages.
How much does it cost to charge an EV at home?
Multiply the electricity drawn (not just the battery energy) by your price per unit. In this page’s example, a 20–80% charge of a 40 kWh battery draws 26.67 units from the supply, costing about ₹213 at ₹8 per unit — roughly ₹0.90–₹1.20 per km for a typical car, far below petrol costs. Use the electricity bill calculator linked below if you want to see how charging changes your monthly bill slab.
Can I use this calculator for an electric scooter or bike?
Yes. Enter the scooter’s battery size — commonly 2 to 4 kWh — and its charger power, often around 0.5 to 1.5 kW for a portable charger (check the charger label and use the Custom option if needed). A 3 kWh scooter battery charging from 20% to 80% at 1 kW and 90% efficiency takes about 2 hours by the same formula.
What efficiency should I enter?
90% is a fair default for AC charging, where the car’s onboard charger typically loses 10–15% as heat. DC fast charging is usually a little more efficient, around 92–95%, because the conversion happens in the charger. If your wallbox or car app reports the energy drawn, compare it once with the battery gain and you will know your own figure.
How accurate is the EV Charging Time Calculator?
The EV Charging Time Calculator uses the standard formula and method for this calculation, so its results are as accurate as the values you enter. For big decisions — money, health or exams — treat the result as a reliable estimate and confirm the final figures with official sources.
Why does my result differ from another calculator?
Small differences usually come from rounding, or from slightly different assumptions behind the scenes — for example, whether a value is rounded at each step or only at the end. With the same inputs and the same options, the EV Charging Time Calculator should match other reliable calculators closely.
Does RupayaTools save the values I enter?
No. The EV Charging Time Calculator calculates everything in your browser, on your own device. The values you enter are not stored on our servers — which is also why the tool works instantly.