Home › File & PDF Tools › FLAC to MP3 Converter
FLAC to MP3 Converter
FLAC is the format music collectors trust: a FLAC file holds every detail of the original recording, which is exactly why the files are big — and why many phones, car stereos and older players refuse them. This free converter turns a FLAC file into a universal MP3 right in your browser: choose the file, pick up to 320 kbps, and download. Because the source is lossless, the MP3 you get is the best MP3 that song can produce. Nothing is uploaded.
Only .flac files are accepted. FLAC is lossless, so it is the best possible source for an MP3. Decoding is done by your browser — Chrome, Edge and Firefox handle FLAC well; Safari may not.
Your file is processed locally with an MP3 encoder stored on this website — it is never uploaded anywhere.
How to use this converter
- Choose your FLAC file. The tool decodes it on your device and shows its length, sample rate and channels.
- Pick an MP3 bitrate: 256 or 320 kbps for music from a lossless source, 192 kbps as the all-round setting, 128 kbps for speech.
- Leave Channels on "keep original" for music, or mix down to mono for voice recordings and podcasts.
- Press "Convert to MP3", wait while it encodes, then press "Download MP3".
How the conversion works
Your browser first decodes the FLAC file into raw sound (the same PCM samples a WAV file holds), using its built-in audio decoder — Chrome, Edge and Firefox all decode FLAC natively. An MP3 encoder stored on this website — the well-known lame encoder — then compresses those samples into an MP3 at the bitrate you chose. Everything runs on your device: the sound never travels to a server, which is why the tool works without accounts, queues or watermarks, and why very long files are limited only by your device's memory.
One honest warning about browsers: because the decoding is done by the browser itself, the same FLAC file can convert in one browser and fail in another — that is a browser limit, not a fault in your file. Safari's FLAC support is the unreliable one; if the tool says it cannot decode your file, open this page in Chrome, Edge or Firefox and it will convert.
Worked example
Imran keeps his music collection as FLAC files ripped from his own CDs. His car stereo plays only MP3, so he converts a 3-minute song (44,100 Hz, stereo) at 256 kbps, keeping stereo. The estimate says 256 × 180 ÷ 8 = about 5.49 MB, the finished MP3 comes out at almost exactly that, and it plays in the car without any fuss. The FLAC original stays in his collection untouched — the MP3 is a listening copy, and 256 kbps from a lossless source is more quality than a car cabin can reveal.
Which browsers can decode FLAC?
| Browser | Can it convert here? |
|---|---|
| Chrome (Windows, Mac, Android) | Yes |
| Edge | Yes |
| Firefox | Yes |
| Safari (iPhone, iPad, Mac) | Not reliably — Safari may refuse to decode FLAC; if it fails, use Chrome, Edge or Firefox |
Frequently asked questions
Are my FLAC files uploaded to a server?
No. The file is decoded and re-encoded entirely in your browser, on your device, using an MP3 encoder stored on this website. Nothing is uploaded, which is why there is no queue and no upload limit — very long recordings are limited only by your device's memory.
What is FLAC, and why are the files so big?
FLAC stands for Free Lossless Audio Codec. "Lossless" means the file keeps every bit of the original recording — nothing is thrown away, unlike MP3, which discards sound details to save space. A FLAC song is often 25–35 MB where an MP3 of the same song is 5–8 MB. That detail is why FLAC is the right format for an archive, and MP3 is the right format for a car stereo.
Will the MP3 sound worse than the FLAC?
MP3 is lossy, so some detail is always lost — but starting from a lossless FLAC gives the cleanest possible MP3. At 320 kbps, and for most listeners at 256 kbps, the difference from the FLAC is effectively inaudible on normal equipment. Keep your FLAC files as the master copies and treat MP3s as listening copies.
Which bitrate should I choose for FLAC music?
256 kbps is the sweet spot for music converted from FLAC — about 1.9 MB a minute with quality very close to the source. Choose 320 kbps if storage is plentiful and you want the maximum. 192 kbps is fine for casual listening, and 128 kbps suits speech, where the mono mix-down option also halves the work.
Why did the tool say my browser cannot decode the file?
Decoding is done by the browser itself. Chrome, Edge and Firefox decode FLAC well, but Safari may not decode FLAC files at all on some systems. The file is not damaged — open this same page in Chrome, Edge or Firefox, choose the file again, and it will convert.
Can I turn an MP3 back into FLAC to get the quality back?
No — and beware of any tool that implies otherwise. The detail MP3 threw away is gone; converting an MP3 to FLAC only wraps the same sound in a much bigger file. Quality only flows one way: from the lossless original down. That is exactly why archiving in FLAC and converting copies to MP3, as this tool does, is the right order.
What is a common mistake when using the FLAC to MP3 Converter?
Typing a value into the wrong field, or in the wrong format. A quick re-check of each field before you press Calculate avoids most wrong results.
I am new to this — how do I get started with the FLAC to MP3 Converter?
Start with the worked example on this page: it walks through a real case step by step. Then replace the example values with your own and calculate — you can change the numbers and re-run it as many times as you like.