Home › Math & Science › Cricket Run Rate Calculator

Cricket Run Rate Calculator

Run rate is the heartbeat of a limited-overs cricket match. It tells you how fast a team is scoring — and, in a chase, exactly how fast it needs to score from here. This cricket run rate calculator works out the current run rate from runs and overs, and the required run rate for a chase from the target, the current score, and the balls remaining. It handles the overs-and-balls notation properly, so 30.2 overs means 30 overs and 2 balls, not thirty point two overs.

5.74 runs per over
287 runs in 50 overs (300 balls) • 0.96 runs per ball

How to use this tool

  1. For a simple run rate, enter the runs scored, the whole overs bowled, and the extra balls (0 to 5).
  2. For a chase, switch to "Required run rate for a chase" at the top.
  3. Enter the target, the total overs in the match (50 for an ODI, 20 for a T20), the current score, and the overs and balls bowled so far.
  4. Read the required run rate as the big number, and the line below for the runs needed, the balls left, and the current run rate.
  5. If the balls box shows an error, check the notation: 19.4 overs is 19 overs and 4 balls — the number after the point can only be 0 to 5.

Run rates in real matches

SituationNumbersRun rate
Steady ODI innings287 runs in 50 overs5.74 per over
Fast T20 innings186 runs in 20 overs9.30 per over
Slow turning pitch213 runs in 50 overs4.26 per over
Chase, well on trackNeed 108 from 118 balls5.49 required
Chase, pressure risingNeed 60 from 30 balls12.00 required
Test match day320 runs in 90 overs3.56 per over

A modern ODI team scoring at 5.74 an over reaches about 287 — a defendable but chaseable total. In T20 cricket the same maths runs much hotter: a required rate above 12 an over means the batting side needs boundaries almost every over.

How it works

Run rate is simply runs divided by overs — but an "over" in cricket scoring is written in a way that catches people out. When a scorebook shows 30.2 overs, it means 30 full overs plus 2 balls, and since an over has 6 balls, that is 182 balls in total, not 30.2 six-ball overs. This calculator takes overs and balls as separate boxes and converts everything to balls first.

Run rate = Runs ÷ (Total balls ÷ 6)  |  Required run rate = Runs still needed ÷ (Balls remaining ÷ 6)

For the required rate, the calculator subtracts the current score from the target to get the runs needed, and subtracts the balls bowled from the match total to get the balls remaining. A chase that needs 108 runs from 118 balls requires 108 ÷ (118 ÷ 6) = 5.49 runs per over. Comparing that with the current rate — 5.93 in the example — tells you whether the chasing team is ahead of the game or falling behind.

You will also hear commentators mention net run rate (NRR) in tournaments. That is a different figure used for league tables: a team's run rate across the whole tournament minus the run rate scored against it, with special rules when a team is bowled out early. It decides who qualifies when teams finish level on points. This page covers the in-match rates; NRR needs the full tournament picture.

Worked example

In an ODI chase, the target is 288. The chasing team is 180 for 4 after 30.2 overs. What is the required run rate?

Step 1: Runs needed — 288 − 180 = 108 runs.
Step 2: Balls bowled — 30 overs and 2 balls = 30 × 6 + 2 = 182 balls.
Step 3: Balls remaining — a 50-over innings has 300 balls, so 300 − 182 = 118 balls (19.4 overs).
Step 4: Divide — 108 ÷ (118 ÷ 6) = 108 ÷ 19.667 = 5.49.

The required run rate is 5.49 runs per over. The current rate is 180 ÷ (182 ÷ 6) = 5.93, so the team is scoring faster than required and is ahead of the chase — those are exactly the numbers this calculator shows for this situation.

FAQ

How is run rate calculated in cricket?

Run rate is runs divided by overs, with overs counted in balls. A score of 287 in 50 overs is 287 ÷ 50 = 5.74 runs per over. For part overs, count the balls: 30.2 overs is 182 balls, which is 30.33 overs for the maths.

How do I work out the required run rate?

Subtract the current score from the target to get the runs needed, and subtract the balls bowled from the match total to get the balls left. Then divide: 108 runs needed from 118 balls is 108 ÷ (118 ÷ 6) = 5.49 runs per over.

Why does 30.2 overs not mean 30.2 overs?

Because the number after the point counts balls, not tenths. 30.2 overs means 30 overs plus 2 balls. Balls can only run from 0 to 5, since the sixth ball completes the over and the count rolls to 31.0.

What is a good run rate in ODI and T20 cricket?

In modern ODI cricket, 5.5 to 6 runs per over is a strong scoring rate, giving totals around 280 to 300. In T20 matches, good teams score at 8.5 to 9.5 per over. On slow pitches, lower rates can still win matches.

What is net run rate and how is it different?

Net run rate is a tournament figure: the average runs a team scores per over across the event, minus the average runs it concedes per over, with an adjustment when a team is bowled out. It separates teams level on points. This calculator covers current and required rates within one match.

Can I use this for a T20 chase?

Yes. Enter 20 as the total overs in the match and the same target, score, and overs boxes work exactly the same way. The maths does not change with the format — only the numbers get bigger.

Note: run rates are rounded to two decimal places, as scoreboards show them. Tournament net run rate uses extra rules and is not covered here.