Home › Unit Converters › MM to Inch Converter

MM to Inch Converter

Convert mm to inch with our free mm to inch converter — or flip it and turn inches back into millimeters. Drill bits, bolts, phone screens, and photo prints are sold in a mix of millimeters and inches in India, so this tool switches between the two in seconds, with no sign-up and no download. It also converts kilometers, miles, meters, centimeters, feet, and yards.

3.937008 inches
100 mm ÷ 25.4 = 3.937008 inches  •  10 centimeters

How to use this converter

  1. Type the amount in the Amount box — for example, 100.
  2. The From box is set to Millimeters and the To box to Inches. You can change either one — the converter also handles kilometers, miles, meters, centimeters, feet, and yards.
  3. Your answer appears in the result box as you type, with the same length in centimeters shown underneath. Press Convert to run it again.
  4. Press Swap to flip the direction and convert inches back into millimeters.

Common amounts

MillimetersInchesCentimeters
1 mm0.0393701 in0.1 cm
5 mm0.19685 in0.5 cm
10 mm0.393701 in1 cm
25.4 mm1 in2.54 cm
50 mm1.9685 in5 cm
100 mm3.93701 in10 cm
127 mm5 in12.7 cm
254 mm10 in25.4 cm
1,000 mm39.3701 in100 cm

How it works

The millimeter and the inch are the two small-length units you meet most often in workshops and product listings. A millimeter is one thousandth of a meter, about the thickness of a credit card. An inch is one twelfth of a foot, roughly the width of an adult thumb. Tools, fasteners, and screens move between the two systems all the time.

The conversion is exact — one of the neatest in all of measurement. Since 1959, the inch has been defined as exactly 25.4 millimeters. To turn millimeters into inches, divide by 25.4. To turn inches back into millimeters, multiply by 25.4. No rounding hides inside the factor itself: 25.4 mm is exactly 1 inch, 127 mm is exactly 5 inches, and 254 mm is exactly 10 inches.

It helps to picture the sizes. A standard photo print of 4 × 6 inches is 101.6 × 152.4 mm. Phone screens are named in inches but specified in millimeters: a 6.1-inch display is about 155 mm tall across the diagonal’s companion dimensions. A 10 mm spanner is 0.393701 inches — close to, but not exactly, 3/8 inch (9.525 mm), which is why mixing the two systems on bolts can round a thread.

Common uses include matching drill bits and bolts to a specification sheet, checking whether a part listed in millimeters fits a space measured in inches, converting photo and paper sizes, and reading tyre, pipe, and screen dimensions. For workshop work, keep the exact 25.4 factor rather than the rough 25 used in quick talk.

Millimeters to inches: inches = millimeters ÷ 25.4  |  Inches to millimeters: millimeters = inches × 25.4  |  1 inch = 25.4 mm  |  1 millimeter = 0.0393701 inches  |  Every pair converts through meters: 1 foot = 304.8 mm, 1 yard = 914.4 mm, 1 mile = 1,609,344 mm

For a quick estimate in your head, divide the millimeters by 25. One hundred millimeters divided by 25 gives 4 inches, close to the exact 3.93701 inches. The shortcut runs about 1.6 percent high, so use the exact 25.4 divisor when a part has to fit, not just look right.

Worked example

Sunita is ordering a photo print online. The frame she owns is listed as 100 mm on the short side, but the printing site asks for the size in inches.

Step 1: Write down the amount in millimeters — 100 mm.
Step 2: Use the conversion factor — 1 inch = 25.4 millimeters.
Step 3: Divide: 100 ÷ 25.4 = 3.937008.
Step 4: Read the result — 3.937008 inches, which rounds to about 3.94 inches, so a 4-inch frame size is the match.

The reverse direction works the same way. Four inches multiplied by 25.4 equals 101.6 millimeters, so the 4-inch frame is a little wider than the 100 mm print edge — a good fit. Those are the exact results this converter gives for 100 mm and for 4 inches.

FAQ

How many inches is 100 mm?

100 millimeters equals 3.937008 inches — about 3.94 inches. Divide 100 by 25.4 to get 3.937008 inches.

Is 25.4 mm exactly 1 inch?

Yes. The inch is defined as exactly 25.4 millimeters by international agreement, so 25.4 mm is exactly 1 inch with no rounding at all.

How many mm is 6 inches?

6 inches equals 152.4 millimeters. Multiply 6 by 25.4 to get 152.4 mm.

How many inches is a 10 mm bolt?

A 10 mm bolt is 0.393701 inches across — close to 3/8 inch (0.375 in) but not the same, so metric and inch bolts are not interchangeable.

Can I convert other length units too?

Yes. This converter handles kilometers, miles, meters, centimeters, millimeters, inches, feet, and yards — pick any two units in the boxes above. Every pair converts through meters, so the results are exact.