Home › Unit Converters › Knots to KMPH
Knots to KMPH
Convert knots to kilometres per hour with this free knots to kmph converter. The knot is the speed of ships and aircraft — and of the wind and sea currents they travel through — but on land everything is kmph. Type a speed in knots and get kmph at once, with mph and metres per second shown alongside. It converts back the other way too, for weather reports, sailing, fishing and flight tracking.
How to use
- Type the speed — the box starts with 20 knots, a typical speed for a fast ferry.
- Check the From unit is knots and the To unit is km/h, or pick any other pair — mph and metres per second are included.
- Press Convert. The big number is your answer; the line below always shows the mph and m/s for the same speed, whichever pair you picked.
- Use swap to go from kmph back to knots — handy when a road or rail speed needs to be compared with a ship or a wind speed.
Knots to kmph — common speeds
| Knots | km/h | mph | What moves at this speed |
|---|---|---|---|
| 1 kn | 1.85 | 1.15 | One nautical mile per hour |
| 5 kn | 9.26 | 5.75 | A walking pace — a slow boat |
| 10 kn | 18.52 | 11.51 | A fishing boat cruising |
| 15 kn | 27.78 | 17.26 | A cargo ship at sea |
| 20 kn | 37.04 | 23.02 | A fast ferry |
| 25 kn | 46.3 | 28.77 | A naval patrol vessel |
| 30 kn | 55.56 | 34.52 | A fast catamaran or speedboat |
| 40 kn | 74.08 | 46.03 | A racing powerboat; strong gale wind |
How it works
A knot is one nautical mile per hour. The nautical mile is tied to the Earth itself: it is one minute of latitude, 1,852 metres exactly, so a ship travelling at 1 knot covers one nautical mile in one hour. Sailors have used it for centuries — the name comes from counting knots on a rope trailed behind the ship — and aviation and weather services kept it, because wind speeds, currents and flight plans all work naturally with it.
Kilometres per hour need no explanation on land, and the bridge between the two is a single fixed number: since the nautical mile is exactly 1.852 km, one knot is exactly 1.852 km/h. There is no approximation hiding in this converter. The same fixed bridge gives mph: a statute mile is 1.609344 km, so knots to mph uses the factor 1.150779.
Where do you actually meet knots? Shipping forecasts and cyclone warnings give wind in knots (a 64-knot wind is a full hurricane-strength storm, about 119 km/h). Cruise lines quote ship speeds in knots — a big cruise ship at 22 knots is doing about 41 km/h. And aircraft ground speeds on tracking sites are often in knots. Converting to kmph makes all of those instantly easy to picture, because you already know what 40 or 100 km/h feels like on the road.
For a mental shortcut, double the knots and take off a tenth: 20 knots → 40 minus 4 = 36, close to the exact 37.04. Or simply remember that a knot is “a little under 2 kmph” and that 10 knots is about 18.5 km/h — bicycle speed.
Worked example
A ferry crosses the harbour at 20 knots. How fast is that in the units on a car’s speedometer?
Step 1: Write down the speed — 20 knots.
Step 2: Use the factor — 1 knot = 1.852 km/h.
Step 3: Multiply: 20 × 1.852 = 37.04.
Step 4: Read the result — 37.04 km/h.
The same speed is 23.02 mph and 10.29 metres per second, both shown under the result. The calculator opens with this exact example: 20 in the box, knots to km/h selected.
FAQ
How many kmph is 20 knots?
20 knots is 37.04 km/h. Multiply the knots by 1.852: 20 × 1.852 = 37.04. The same speed is 23.02 mph, which is why a fast ferry at 20 knots feels quick on the water but modest next to road traffic.
Why is a knot called a knot?
Sailors once measured speed by throwing a log overboard tied to a rope with knots spaced along it, and counting how many knots ran out in a set time, timed by a small sand glass. The count gave the speed — and the name stuck, even though the measurement is now done by instruments.
Is a knot the same as a nautical mile?
No. A nautical mile is a distance (1,852 metres); a knot is a speed — one nautical mile per hour. Saying “20 knots per hour” is wrong, because the “per hour” is already inside the knot. This page converts speeds only.
How do I convert kmph back to knots?
Divide the km/h by 1.852. For example, 100 km/h ÷ 1.852 = 54 knots. Or press the swap button in this tool and type the kmph figure — the result appears in knots, with mph and m/s alongside.
What is the fastest ship speed in knots?
Large container ships usually cruise at 20–25 knots (37–46 km/h). Fast ferries reach 35–40 knots, and racing powerboats pass 60 knots. Wind is also measured in knots: a cyclone’s winds can exceed 100 knots, which is over 185 km/h.
How many mph is one knot?
One knot is 1.150779 mph, because a nautical mile (1.852 km) is longer than a statute mile (1.609344 km). So 10 knots is 11.51 mph, and 30 knots is 34.52 mph.
What is a common mistake when using the Knots to KMPH Converter?
Mixing up the units — for example, entering a value in centimetres where the field expects metres. Check the unit shown on each field before you calculate, and sanity-check whether the size of the answer makes sense.
I am new to this — how do I get started with the Knots to KMPH Converter?
Start with the worked example on this page: it walks through a real case step by step. Then replace the example values with your own and calculate — you can change the numbers and re-run it as many times as you like.