Home › Unit Converters › Degrees to Radians

Degrees to Radians

Convert degrees to radians with this free degrees to radians converter — the swap every maths, physics and engineering student has to make a hundred times. Type an angle in degrees and get radians as a decimal and as an exact fraction of π, or convert radians, gradians and full turns back into degrees. Negative angles and angles past 360° are handled too.

3.1416 radians
180° × π/180 = 3.1416 rad — exactly π • 200 gradians • 0.5 turns

How to use

  1. Type your angle — the box starts with 180 degrees. Decimals and negative angles are fine.
  2. Check the From unit is degrees and the To unit is radians, or pick gradians or turns instead.
  3. Press Convert. The big number is the answer; the line under it shows the exact multiple of π when the angle is a “nice” one, plus the gradians and turns.
  4. Swap the units to turn radians back into degrees — the path every textbook problem eventually takes.

Common angles in degrees and radians

DegreesRadians (exact)RadiansGradians
0°000
30°π/60.523633.33
45°π/40.785450
60°π/31.047266.67
90°π/21.5708100
120°2π/32.0944133.33
135°3π/42.3562150
150°5π/62.618166.67
180°π3.1416200
270°3π/24.7124300
360°2π6.2832400

How it works

Degrees are the familiar unit: a full turn is split into 360 of them, a hangover from ancient Babylonian astronomy. Radians come from the circle itself. Take a circle, and mark off an arc along its edge exactly as long as its radius — the angle at the centre of that arc is one radian. Since the full circumference is 2π times the radius, a full turn holds exactly 2π radians, a half turn is π radians, and a right angle is π/2.

Because the radian is built from the circle’s own measurements, it is the unit that makes higher maths work cleanly: the formulas for arc length (arc = radius × angle), sector area, and the derivatives of sin and cos are all simple only when the angle is in radians. That is why calculators have a DEG/RAD switch, why physics problems quote angular speed in radians per second, and why a wrong mode setting is the classic cause of “impossible” trigonometry answers.

Degrees to radians: radians = degrees × π/180  |  Radians to degrees: degrees = radians × 180/π  |  180° = π rad  •  1 radian = 57.2958°  |  Degrees to gradians: gon = degrees × 10/9  |  1 turn = 360° = 2π rad = 400 gon

Most textbook angles have exact radian forms worth memorising: 30° is π/6, 45° is π/4, 60° is π/3 and 90° is π/2. This converter spots those cases — when your result is a simple fraction of π (with denominator up to 12), the line under the result says so, which is a quick check that you are on the right track. For other angles, the decimal to four places is what you need: 1° is 0.0175 radians, and 57.2958° is one radian.

Gradians (also called gon) split the right angle into 100 parts, so a full turn is 400 gon; they appear in surveying in some countries. Turns simply count full circles, which is handy for rotations — a fan spinning at 5 turns per second, for instance. Both are included in the unit lists above so any of the four can be turned into any other.

Worked example

A textbook question asks: express 180° in radians.

Step 1: Write down the angle — 180 degrees.
Step 2: Use the factor — multiply by π/180.
Step 3: Multiply: 180 × π/180 = π.
Step 4: Read the result — exactly π, which is 3.1416 radians to four decimal places.

And the second most common case: 90° × π/180 = π/2 = 1.5708 radians. The calculator opens with the 180° example and shows the “exactly π” note under the result, plus 200 gradians and half a turn for the same angle.

FAQ

What is 180 degrees in radians?

180 degrees is exactly π radians, which is 3.1416 to four decimal places. Multiply by π/180 and the 180 cancels, leaving π. A straight line angle — half a full turn — is the most quoted degree-to-radian answer of all.

How do I convert degrees to radians by hand?

Multiply the degrees by π/180 (about 0.017453). So 60° × π/180 = π/3 = 1.0472 radians, and 45° becomes π/4 = 0.7854. For common angles the answer is a tidy fraction of π, which is a good check on your working.

How many degrees is 1 radian?

One radian is 180/π degrees, which is 57.2958°. That is a fairly wide angle — a little less than a third of a straight line. There are 2π, about 6.2832, radians in a full 360° turn.

Why do mathematicians prefer radians?

Because radians are defined by the circle itself, the key formulas become simple: arc length is just radius × angle, and the derivative of sin x is cos x — both true only in radians. In degrees, extra π/180 factors appear everywhere and clutter the maths.

Can an angle be more than 360 degrees or negative?

Yes. Angles past 360° mean more than one full turn — 720° is two turns, or 4π radians — and negative angles mean rotation in the opposite (clockwise) direction. This converter accepts both and converts them directly, without winding them back into the 0–360 range.

What is a gradian?

A gradian (gon) divides a right angle into 100 parts, so a full circle is 400 gradians and 90° equals 100 gon. It was designed to make angles decimal-friendly and is used in surveying in parts of Europe. This tool converts between degrees, radians, gradians and turns.

Is the Degrees to Radians Converter free to use?

Yes. The Degrees to Radians Converter is completely free on RupayaTools — no sign-up, no subscription and no usage limit. Just enter your values and your result appears straight away.

Do I need an account to use the Degrees to Radians Converter?

No. The Degrees to Radians Converter works without any account or login, and you can use it as many times as you like. There is nothing to install either — it opens directly in your browser.